Specs |
Overall Gain |
Independently Programmable 0 to 20 dB on each input |
Gain Range |
99.5 dB, 199 Equal Increments |
Gain Resolution |
0.5 dB, +/- 0.03 dB Over Entire Range |
Frequency Response |
10 Hz – 300 kHz, -3 dB @ 8 ohms |
Maximum Input Level |
13.5 volts (RMS) @ 0 dB Gain |
Maximum Output Level |
13.5 volts (RMS) |
THD + Noise |
< .003% @ 2 volt (RMS) Output, 50 Hz – 20 kHz |
Signal-to-Noise Ratio |
> 100 dB |
Common Mode Rejection Ratio |
> 90 dB, 20 Hz – 20 kHz |
Channel Separation |
99.5 dB |
Input Impedance |
40k ohms Balanced or Unbalanced |
Output Impedance |
60 ohms Balanced or Unbalanced |
Inputs |
4 pair Balanced (XLR), 2 pair Unbalanced (RCA) |
Outputs |
2 pair Balanced (XLR), 2 pair Unbalanced (RCA) for Main Out
1 pair Balanced (XLR), 1 pair Unbalanced (RCA) for Record Out |
Power Consumption |
Min – 15 watts, Max – 50 watts
Depending on Battery Recharge Rate |
Power Supply |
Universal Voltage Input Power Supply with
Selectable Off-line NiMh Battery Power Supply and Charger |
Display |
320 x 32 dot Vacuum Fluorescent Display (VFD) |
Preamplifier Weight |
46 lbs. / 21 kg |
Overall Preamplifier Dimensions (H) x (W) x (D) |
6.4” x 15.5” x 12.3” (162mm x 394mm x 311mm) |
| |
Because Jeff Rowland Design Group is constantly analyzing new design improvements, we reserve the right to change or modify product specifications without notice or obligation. |